| View previous topic :: View next topic |
| Author |
Message |
fina920
Contributing Member
Joined: 07 Jun 2009
Posts: 84
|
 Posted: Sat May 21, 2011 6:40 pm Post subject: wierd bolts |
 |
|
| Ok see if you can follow me....on the rear dampner hub, the thing that holds the "hockey pucks", I located some large allen head bolts. The bolts face to the inside of the rear wheel. They are part of the rear hub. My question is what are they for and are they supposed to be wicked loose? I was able to turn them by hand. This worried me so I tightned them using a large allen wrench. I do not know how to post photos or else I would. Any thought on what they are would be great.. |
|
| Back to top |
|
 |
getmad2009
Joined: 11 Oct 2009
Posts: 668
Location: st colomban
|
| Posted: Sun May 22, 2011 8:19 pm Post subject: |
|
|
if you meen thoses bolts .......
there suppose to be fuging tight .........and with red loctite......they hold the tab inside the rear hub .....
realy not suppose to be loose.......!!
_________________
si ca marche pas.....prend un marteau
si ca marche pas plus ......
prend un plus gros marteau...... |
|
| Back to top |
|
|
fina920
Contributing Member
Joined: 07 Jun 2009
Posts: 84
|
| Posted: Sun May 22, 2011 8:48 pm Post subject: bolts |
|
|
yes that would be them....I was detailing my hub when two of the bolt began spinning freely so I tightened them. I think I should make sure they are super tight. Why the hell would they loosen up? I have never had them off or even touched them. Just another headache..
Thanks for the photo and for understanding what I was talking about. |
|
| Back to top |
|
|
getmad2009
Joined: 11 Oct 2009
Posts: 668
Location: st colomban
|
| Posted: Mon May 23, 2011 5:48 pm Post subject: |
|
|
no problem..........happy to help......
_________________
si ca marche pas.....prend un marteau
si ca marche pas plus ......
prend un plus gros marteau...... |
|
| Back to top |
|
|
twn454
Killers Dad
Joined: 03 Jun 2009
Posts: 133
Location: Fort Washington, Md
|
| Posted: Mon May 23, 2011 9:48 pm Post subject: |
|
|
| The next time you or we lol have your hub apart those need to be tighten and then weld the flanges on the inside of the hub that they are attached to. Simple and Permanent fix! |
|
| Back to top |
|
|
fina920
Contributing Member
Joined: 07 Jun 2009
Posts: 84
|
| Posted: Tue May 24, 2011 7:29 am Post subject: bolts |
|
|
Oh I am sure it will be WE.
So what are you doing the first week of May next year? hahaha |
|
| Back to top |
|
|
WAYNE 07
Lost & Confused
Joined: 03 Jun 2009
Posts: 569
Location: LAKE COUNTY, FL
|
| Posted: Wed May 25, 2011 11:02 pm Post subject: |
|
|
 uhhhhhhh I would say that more than likely we will be working on a white T-rex.
_________________
X-treme-toyz.net
LIFE`S TOO SHORT |
|
| Back to top |
|
|
fina920
Contributing Member
Joined: 07 Jun 2009
Posts: 84
|
| Posted: Thu May 26, 2011 2:17 pm Post subject: fixing |
|
|
Well if you would have fixed it right the first time we would not have to keep fixing it.....hahaha
One of these years I will surprise you guys. I will show up with a rex that will not have to be repaired the minute I take it off the trailer. I am not saying it will be next year, but one of these years. |
|
| Back to top |
|
|
twn454
Killers Dad
Joined: 03 Jun 2009
Posts: 133
Location: Fort Washington, Md
|
| Posted: Thu May 26, 2011 10:25 pm Post subject: |
|
|
I think your just trying to roll like wayne does!  |
|
| Back to top |
|
|
fina920
Contributing Member
Joined: 07 Jun 2009
Posts: 84
|
| Posted: Fri May 27, 2011 1:49 am Post subject: roll |
|
|
| Well I do like Wayne rolling to the gap with a "spare" rex. It helped me out huge. Its all good. |
|
| Back to top |
|
|
fina920
Contributing Member
Joined: 07 Jun 2009
Posts: 84
|
| Posted: Fri May 27, 2011 1:50 am Post subject: roll |
|
|
| Well I do like Wayne rolling to the gap with a "spare" rex. It helped me out huge. Its all good. |
|
| Back to top |
|
|
|
Photo Gallery
FAQ
Search
Memberlist
Usergroups
Register
Log in to check your private messages
Log in
