T-Rex of America

WINK · Posted: Wed May 05, 2010 11:27 am Post subject: bolt pattern?

what is the bolt patter on a 2005 1200?

chicknfeet · Posted: Wed May 05, 2010 12:06 pm Post subject:

http://forum2.trexofamerica.net/viewtopic.php?t=373&highlight=offset
_________________
"OUT TO LUNCH" and not coming back.

Sexy_Rex · Posted: Wed May 05, 2010 12:07 pm Post subject:

Colorado Customs
Front: 15X7 or 16x7, 5.375 back space
Rear: 17x11, 6.00 back space (Special inner bore pattern)

Enkie
Front: 16x7, +35mm offset, 5x100
Rear: 17x10, +18mm offset, 5x114.3
_________________
2007 T-Rex 1400R - BMW Laguna Seca Blue -Turbo Powered
2003 Honda ST1300 - Candy Metalic Red
2002 Acura MDX
21 Speed Cannondale M300 Bicycle

WINK · Posted: Wed May 05, 2010 12:14 pm Post subject:

Thanks a million

WINK · Posted: Wed May 05, 2010 12:25 pm Post subject:

There telling me that thats the wheel size, they need to know how many bolts hold up the rear wheel and the mm size if that make sence to anyone. Trying to get a price on some custom wheels. Thanks

J-rex · Posted: Wed May 05, 2010 2:10 pm Post subject:

5 lug rear wheel and I believe the lug nuts are 19mm

WINK · Posted: Wed May 05, 2010 2:21 pm Post subject:

The 3 choices are
5 X 115
5 X 127
5 X 130

Sexy_Rex · Posted: Wed May 05, 2010 5:22 pm Post subject:

What brand of rims are you looking at? Offset is extremely important. When you mentioned 5 x 115, the bolt pattern might work. Just depends if the manufacture round off to the nearest number. Both Chicknfeet and I have HRE rims - 540 series. You can get these rims chrome, polish, and/or powder coated in any color. The only problem is their cost and you will need lower profile tires. Hope this information is helpful. Just remember that it is a "FARKLE".
_________________
2007 T-Rex 1400R - BMW Laguna Seca Blue -Turbo Powered
2003 Honda ST1300 - Candy Metalic Red
2002 Acura MDX
21 Speed Cannondale M300 Bicycle

WINK · Posted: Wed May 05, 2010 9:49 pm Post subject:

There ashanti wheels

Sexy_Rex · Posted: Wed May 05, 2010 10:20 pm Post subject:

I just visited their WEB site. Nice looking rims but I see a major problem. The smallest wheel size is 19". By the time these wheels are mounted on the front, there wiil be clearance problems for the fender. Check the manufacturer's diameter of the current tire on your T-Rex. Make sure that you stay within that dimension with any new profile of your rim and tire. My major concern for you is that you really do your research. I hate to see you make an expensive mistake.

Again, the wheel diameter, bolt pattern, and offset are all important. Even when you find the right size, the design of the rim just might be wrong. For example of the HRE rims, the 540 series is OK, but the 540R series is not. Make sure that your new rim is design for high speeds and "g" forces. OK?

What is your front & rear gear ratio - 15/50? Since the wheel is off, you might want to consider changing them. Changing your gears requires a new chain. Again, be careful to not get your gear ratio to low, you will lose your pulling power in 6th gear. Best source is Johnny on this technical issue.

Also, now is a good time to install new bearings.
_________________
2007 T-Rex 1400R - BMW Laguna Seca Blue -Turbo Powered
2003 Honda ST1300 - Candy Metalic Red
2002 Acura MDX
21 Speed Cannondale M300 Bicycle

J-rex · Posted: Thu May 06, 2010 7:42 pm Post subject:

Trexofny has had special custom made fenders for people who wish to run larger than stock wheels...pm him w/ questions on that.

Sexy_Rex · Posted: Thu May 06, 2010 9:18 pm Post subject:

WINK · Posted: Sat May 08, 2010 10:50 pm Post subject:

Got a bolt measuring meter. Its 5 x 100mm for the front and 5 X 130mm for the rear. Thanks for everyones help.