T-Rex of America

Gary · Posted: Sun Oct 04, 2009 3:44 pm Post subject: Clutch master cylinder kit

Anybody know who makes the clucth master cylinder and where to get a kit to repair the seal.

I can see some fluid that has leaked from the rubber boot at the front of the master cyclinder and if I hold the clutch in for an extended time it slowly starts to engage.

I'm sure it needs a master cylinder kit, but I have no idea where to get one.

Thanks,

Gary

K3 · Contributing Member Joined: 04 Jun 2009 Posts: 48

Are you sure its not the plastic line?

JOHNNY · Joined: 04 Jun 2009 Posts: 247

I think you re right Ken. Double check before getting a kit. Take the nose of be sure.

Gary · Posted: Mon Oct 05, 2009 8:17 am Post subject:

Thanks for the tips K3 and Johnny.

I will check the line before trying to find a kit.

So far, whatever the cause, it is not bad enough to stop me riding it.

I leave it up in the mountains these days, so I think I will try to get away with it for the next couple of weekends.

When it starts getting too cold up there (and they start putting pea gravel on the roads) I will bring it back to Atlanta and pull the nose off.

K3 · Contributing Member Joined: 04 Jun 2009 Posts: 48

I woudnt go to far if it fails you wont be going anywhere, tempted fate myself and lost.